Keurig® Replacement Parts


Updated By Andrew Carter, March 18 2014
keurigtroubleshooting@gmail.com



 

We have had a few emails from readers wanting to know about replacement parts for their Keurig®. This page lists and reviews a number of the most common parts that are sold. If you are unsure if you need a part or we haven’t listed something you are looking for, get in touch by clicking here or using the Contact Us section on the right side and we will try and help the best we can.
 
Please do note that some replacement parts, such as air pumps or transformers, do need a certain level of experience in replacing them and will tend to void any warranty you have with a shop or Keurig®. However, if you are stuck with the two options of either throwing your Keurig out or attempting a repair, spending a few dollars on the repair rather than hundreds on a new brewer, may well be your best option.


 

Keurig® Entry Needle Replacement

Keurig Entry Needle Replacement


Features:

Description:

If your Keurig® is making a larger than normal hole on the top of the k cup® or appears to be loose or damaged, then a replacement entry needle may be what you require.

The entry needle forms part of the tubing system that brings the boiled water from the unit's boiler into the k cup® and then finally into your coffee cup. If the needle is loose or has become blunt (which is unusual, but can happen) it can lead to the creation of a larger than normal hole in the top of the k cup®. This in turn can mean coffee grounds in the coffee cup or a real mess from the pressurized water not being properly directed.
 

Price:

Available from Amazon.com for only $19.99


 

Keurig® Water Reservoir Tank Replacement

Keurig Water Tank Replacement


Features:

Description:

As strong as these water reservoir tanks are, sometimes they do become damaged through being dropped during cleaning or someone in the family decides that steel wool will give a proper clean - we have seen it all.

So whether you are needing a replacement tank because the original is leaking or it just looks bad now, a new tank is what you might be after.
 

Price:

Available from ebay.com, both new and old units are available and start as low as $2.25 (at time of writing). We find eBay the best source for these items, providing a good rank of models.


Keurig® Water Filter Assembly and Refills

Keurig Water Filter

Features:

Description:

Filtering your water for your favorite coffee can make a real difference to the taste. For those blessed with fresh and clean water, this unit is probably not required. But if you are like us, filtering the water really helps improve the taste we can achieve for our Keurig® brewed coffee.
 
Two water filters are included in this pack and it can be used in almost the whole range of Keurig® K Cup® brewers (do check to make sure your model is covered).

Price:

Available from Amazon.com for only $20.99.



 

K-Cup® Holder Replacement

Keurig K Cup Holder

Features:

Description:

This K Cup holder from Cuisinart will replace your existing one if it becomes damaged. Technically there are two parts to this product. The first is what Keurig® call the portion pack holder, so as the name suggests, this is where the K Cup sits in your brewer. The second section is what they call the funnel and this is what guides the coffee from the k cup to your coffee cup. The exit needle sets in top part, or the portion pack holder.
 
Now the K Cup Holder shouldn’t ever need replacing unless it does become damaged – for example it gets dropped or cracked in some way. So don’t rush out and buy this hoping to fix a Keurig® problem unless there is evidence of some damage.
 

Price:

Available from Amazon.com for only $19.99.






Keurig® Mini Air Pump Replacement

Keurig Air Pump


Features:

  • Keurig® Mini Pump
  • Replaces the air pump is most Keurig® models

Description:

This air pump can be used as a replacement on the Keurig® B30, 31, 40, 60 and 70 models. Because of their differences in size, on the larger models the wires to the air pump may need to be spliced in order to be attached to their electric power supplies. But if you are doing this repair already then this won’t be a problem.

With that in mind, this repair should only be attempted if you have experience dealing with electric components. You will need to be able to take off the main panels to your Keurig® in order to get access to the air pump, which generally sits down near the bottom of the unit.

Keurig® mini air pump that is used in all models up to the VUE units and including the B30 B31 B40 B60 B70 etc. These may have slightly different wire lengths depending on the unit they are out of and the wire path taken. Some customers splice the power wires and some just route it a different path depending on your unit.
 

Price:

Amazon.com has the Keurig® Mini Air Pump available for only $19.49.
 

Keurig® Intake Tubing

Keurig Intake Tubing


Features:

  • Replacement for the intake tubing for your Keurig®
  • For models B70 B77 and K75
  • Replaces the hose, gasket, and screen filter from the bottom of tank to the pump

Description:

If your Keurig® has a leak that is coming from around its base, perhaps through the metal base plate, then it may have a problem with its intake tubing - which forms part of the water pump system in most Keurig® machines.

If this is the situation you are facing then the replacement of its intake tubing may fix this problem, and have you back in the business of making coffee again - rather then cleaning up leaks!
 

Price:

Comes with free shipping from Amazon.com and is priced at $29.99.


 

Keurig® Solenoid Replacement

Keurig Solenoid


Features:

  • Keurig® Replacement Solenoid
  • Fits all models
  • Includes power connection at the end of the wires
  • B30 B31 B40 B50 B60 B66 B70 B77 B79 and more except VUE®

Description:

A leaking solenoid has to be one of the biggest problems for the Keurig® brewer design. As we explained in our section Problem With Your Keurig® Coffee Brewer? The solenoid is designed to control and regulate the water pressure in your Keurig®. However, it can leak around its sealed ends and this leakage causes real problems for air and water pumps and power transformers that sit below them in most Keurig®s.
 
Getting access to the solenoids is not easy. You need to be able to remove the panels from your Keurig® and be able to have some understanding of the workings inside. However, if spending $20 and then some time to repair, this can be a real saving repair for your Keurig® that otherwise may have to be thrown out.
 

Price:

Well priced at Amazon.com for only $19.99.
 
 

Gasket Washer and Cap for Keurig® Brewers - Does your Brewer Leak?

Keurig Washer Gasket


Features:

  • Stops leaking with many alternative K-Cup® solutions.....
  • My K-Cup®, My-Cap, EZ-Cup, Solofill, Brew-Saver, EkoBrew, and more
  • Works with all Keurig® brewers
  • Includes one green cap to allow you to reuse your K-cups®
  • Fill It! Cap It! Brew It!

Description:

Although not a common problem, some of our readers have had problems with their Keurig®’s gasket washer becoming worn or damaged and so causing their machines to leak during the brewing process. This problem can generally be seen when there is leakage around the entry needle area as it is not providing a proper seal for the high pressure hot water.

Price:

On sale at the time of writing at Amazon.com for only $2.99 – that is a 40% savings!
 
 

Keurig® Power Cord Replacement

Keurig Replacement Power Cord


Features:

  • Keurig® Power Cord Replacement
  • OEM
  • Fits all models

Description:

As we mention below we regards to replacing a Keurig® brewer transformer, the replacement of any electrical component needs to be carried out with caution and really only if you have experience with this type of repair.

The power cord is not a common cause of problems with Keurig® brewers. Unless it gets caught in a door or the door chews off the end, there isn’t much that can go wrong with them. However, if the dog did get hold of the end and gave it a good chew, $20 for a new cord will certainly be cheaper than buying a whole new Keurig®.
 

Price:

Available from Amazon.com for only $19.99.
 
 

Keurig® B70 Power Transformer Replacement

Keurig B70 Power Transformer


Features:

  • Keurig® B40 Power Transformer
  • OEM

Description:

Along with air and water pump failures, problems with a damaged power transformer has to be one of the most common problems we hear about from our readers. As we mentioned above, and in our article titled Problem With Your Keurig® Coffee Brewer? Under the sub heading of Brewer Will Not Power On, any leakage from one of the solenoid units in your Keurig® can cause real problems for the transformer sitting below. And this is the problem that we hear about the most when dealing with Keurig® brewer power issues.

As you will be dealing with taking the panels off your Keurig® and dealing with wiring that will connect to the mains power, this repair should only be undertaken if you have experience in this field. It’s not a quick or easy repair and so we would only recommend it if this is your last option to getting your Keurig® back into action.

Please do note for this replacement transformer: it will also work on the B40 and B70 models, however you may need to splice wires to ensure it can reach the circuit board.
 

Price:

Available brand new from Amazon.com for $29.99.
 
 

Keurig® B40 Circuit Board and Wiring Replacement

Keurig B40 Circuit Board and Wires


Features:

  • Keurig® B40 Circuit Board and Wiring
  • Brand new OEM!

Description:

The replacement of any Keurig® circuit board or its rewiring is quite an advanced level of repair and its one that even Keurig® themselves don’t offer on their machines (they find it much more cost effective to just replace the whole machine rather than attempt the repair).
 
However, if you have an old Keurig® B40 Elite and a new circuit board will solve the problem, well this option is certainly cheaper than buying a whole new brewer. Priced at only $19.99 it could be money well spent, bringing your B60 back to life (these brewers, new, cost over $100).
 

Price:

Available from Amazon.com for $19.99.
 
 

Keurig® B70 Circuits and Wiring Replacement

Keurig B70 Circuits and Wiring


Features:

  • Keurig® B70 Circuit Board and Wiring
  • OEM

Description:

As we mentioned for the B40 Keurig® circuit board replacement above, the B70 board and wiring replacement requires quite and advanced level of technical knowledge and it’s not a repair we recommend unless you, or a friend, have had experience with this type of thing before.

At the same time, for around $30 this type of fix could be just what your B70 needs to bring it back to life. Any leakage onto the electronics or a power surge through the brewer will often damage the circuitry with the only options available is to either through the unit out or go for the replacement. And with a new B70 costing $150 or more, this $30 could be money very well spent.
 

Price:

Available from Amazon.com for $29.99.